Are IES files available for lighting designers and specifiers?
Yes. Photometrics for the both the 2X4 and 2X2 version are available for download at the Zipline LEDmini site.
View ArticleCan the 9860-LHG be wired to a 9863-OCC allowing the sensor unit to control...
Can the 9860-LHG be wired to a 9863-OCC allowing the sensor unit to control switching for both?
View ArticleHow much wattage does the Zipline Platinum unit draw? What is the lumen/watt...
Zipline LED 2X4 draws 60 watts, provides 5700 lumens in output and has approximately 94 lumens/wattfixture efficiency. Zipline LED 2X2 draws 37 Watts, provides 3400 lumens in output and...
View ArticleWill the driver used in Zipline LED be replaceable rather than buying a new...
Yes. The driver is easily reachable by removing the retrofit tray. It connects using standard connectors.
View ArticleWho makes the driver used in Zipline LED?
Currently we are using Inventronics drivers. This is subject to change without notice.
View ArticleInstalling Lampholder 13550-W
I am replacing lampholder 13550-W. Do I strip the wires before pushing them into the lampholder? Both wires are the same color (blue) so I am assuming polarity is not an issue. Is my assumption correct?
View ArticleIf my customer decides they want a lower lumen output, can you simply replace...
No. To obtain a lower lumen output, Leviton will provide a Zipline model with a driver calibrated toprovide less power to the LEDs.
View ArticleWhat color temperatures are available?
Zipline LED comes in 4000K and 3500K color temperatures.
View ArticleIs the Zipline LED dimmable?
Yes. The present version of Zipline LED is 0-10V dimmable and works well with our Renoir II dimmers.
View ArticleWhat dimmers can I use with the Zipline LED?
Leviton recommends the following dimmers and will be updated with more compatible Leviton dimmers: Cat. No. DescriptionAWSMT-7DW Renoir® II Slide Preset Master, Thin Heat...
View ArticleWhat is the difference between a retrofit kit solution and whole fixture...
Our retrofit solution installs into the existing troffer without having to remove the original fixture. Afterremoving the components from the fluorescent troffer, the Zipline LED installs in minutes.
View ArticleCan a socket that is rated 125v be used on 240v?
Can a candelabra base socket that is rated 125 volts be used on 240 volts? If not is there a special candelabra base socket that is needed for 240 volts?
View ArticleWhat is the max operating temperature range of a 26725 CFL lampholder?
The max operating temperature range of the 26725 CFL lampholder is 125 degrees Celsius.
View ArticleIs the Zipline LED dimmable?
Yes. The present version of Zipline LED is 0-10V dimmable and works well with our Renoir II dimmers.
View Article