Need help locating a Leviton keyless socket
I have an antique light fixture with a smaller brass Leviton keyless socket. I don't think it is a candelabra socket. The brass outer shell measures 3/4" wide and is 2" long. The metallic socket is...
View ArticleAre IES files available for lighting designers and specifiers?
Yes. Photometrics for the both the 2X4 and 2X2 version are available for download at the Zipline LEDmini site.
View ArticleHow much wattage does the Zipline Platinum unit draw? What is the lumen/watt...
Zipline LED 2X4 draws 60 watts, provides 5700 lumens in output and has approximately 94 lumens/wattfixture efficiency. Zipline LED 2X2 draws 37 Watts, provides 3400 lumens in output and...
View ArticleCan the 9860-LHG be wired to a 9863-OCC allowing the sensor unit to control...
Can the 9860-LHG be wired to a 9863-OCC allowing the sensor unit to control switching for both?
View ArticleCan a socket that is rated 125v be used on 240v?
Can a candelabra base socket that is rated 125 volts be used on 240 volts? If not is there a special candelabra base socket that is needed for 240 volts?
View ArticleWhat is the difference between the snap-in LED lamps/light arrays used in...
Zipline LED light arrays are superior to most LED tubes or T-LEDs in safety, appearance, longevity,replace-ability and performance. Indirect-mounted LEDs offer highly – efficient light output with...
View ArticleWhat dimmers can I use with the Zipline LED?
Leviton recommends the following dimmers and will be updated with more compatible Leviton dimmers: Cat. No. DescriptionAWSMT-7DW Renoir® II Slide Preset Master, Thin Heat...
View ArticleMogul-to-Mogul Extension
Can the 8647-100 mogul-to-mogul extension be used in an open rated fixture?
View ArticleInstallation for 167 keyless lampholder
http://www.leviton.com/OA_HTML/ibeCCtpItmDspRte.jsp?item=2810§ion=10183&minisite=10026 please confirm: no wire stripping. feed in insulated 12/14 guage stranded wire and tighten top? I...
View ArticleWill the snap-in LED lamps/light arrays used in Zipline LED be replaceable...
Yes. They can also be upgraded over time as LEDs become more efficient.
View ArticleWill future Zipline LED models include an occupancy sensor and/or daylight...
Yes, these models will be available later in the year.
View ArticleWhat Zipline LED configurations are being released and when will each version...
The Zipline LED roadmap includes, but is not limited to the following: - Integral sensor equipped models - Full fixture (non-retrofit) versions of all of the above- Lower lumen output models –...
View ArticleWhat customer segment of the lighting industry has the highest potential for...
All indoor and damp location (covered) outdoor commercial downlight spaces using troffer lighting arepotential Zipline LED retrofit customers. Spaces that are difficult to reach for re-lamping are...
View ArticleLampholder 9860-LHG with Occupancy Sensor?
Can the 9860-LHG be conected to a occupancy sensor switch if that is suitable for all types of lights, inlcuding the CFL from the 9860-LHG? The package says not, but I am wondering why that would be if...
View ArticleWill replacement trim pieces be available?
Replacement trim pieces will be available for purchase.
View ArticleCan the 9863-OCC be used with a standard 3-way switch in the remote switch...
Can the 9863-OCC be used with a standard 3-way switch in the remote switch application?
View ArticleCan the 9863-OCC be used with higher wattage CFL's?
Can the 9863-OCC be used with higher wattage CFL's?
View ArticleWhat is the operating temperature of the 9862-PCH and the 9860-LHG?
What is the operating temperature of the 9862-PCH and the 9860-LHG?
View Article